Publications Along with DOIs and Citations 2021-2022 | ||||||
S. No | Citation | DOI/Link | Faculty | Year | Month | Indexing |
1 | Anil Kumar Dahiya, Basanta Kumar Bhuyan, Shailendra Kumar ‘Perspective Study of Abrasive Water Jet Machining - A Review’ is accepted for publication in Journal of Mechanical Science and Technology (JMST), Electronic ISSN 1976-3824, Print ISSN 1738-494X, 36(1) 2022, page 213-224 | http://doi.org/10.1007/s12206-021-1220-x | Anil Kumar Dahiya | 2022 | January | SCIE |
2 | Anil Kumar Dahiya, Basanta Kumar Bhuyan, Shailendra Kumar Optimization of Process Parameters For Surface Roughness of GFRP With AWJ Machining Using Taguchi And GRA Methods, International Journal of Modern Manufacturing Technologies. ISSN 2067–3604, Vol. XIII, No. 2-2021, pages 14-20 | https://doi.org/ 10.54684/ijmmt.2021.13.2.14 | Anil Kumar Dahiya | 2021 | December | SCOPUS |
3 | Anil Kumar Dahiya, Basanta Kumar Bhuyan, Shailendra Kumar ‘A review on Machining Potential of Composite Materials during Abrasive Water Jet Machining’ Lecture Notes in Mechanical Engineering, 1301-1315 | https://doi.org/10.1007/978-981-16-2794-1 | Anil Kumar Dahiya | 2022 | January | SCOPUS |
4 | Gambhir D,Sherwani A.F. Arora A & Ashwni Parametric optimization of blowdown operated double effect Vapor absorption refrigeration system, Journal of Thermal Engineering 8 (1), 78-89 | https://doi.org/10.18186/thermal.1067035 | Ashwni | 2022 | Febuary | ESCI |
5 | Ashwni, and Ahmad Faizan Sherwani. 2022. “Analysis of Organic Rankine Cycle Integrated Multi Evaporator Vapor-Compression Refrigeration (ORC-mVCR) System.” International Journal of Refrigeration. | https://doi.org/https://doi.org/10.1016/j.ijrefrig.2022.03.014 | Ashwni | 2022 | March | SCI |
6 | Ashwani, Performance assessment of triangular Obstacles mounted Solar Air Heater Using Taguchi Method, Journal of Engineering Research - ICARI Special Issue, 2021 https://doi.org/10.36909/jer.ICARI.15321 | https://doi.org/10.36909/jer.ICARI.15321 | Ashwni | 2021 | October | SCIE |
7 | Gambhir D,Sherwani A.F. Arora A & Ashwni, Parametric optimization of blowdown operated double effect Vapor absorption refrigeration system, Journal of Thermal Engineering 8 (1), 78-89 | https://doi.org/10.18186/thermal.1067035 | Deshdeep Gambhir | 2022 | Febuary | ESCI |
8 | N. Solanki, A. Arora, and R. K. Singh, “Performance Comparison of Refrigerants HFO1234yf and HFO1234ze in a Vapour Compression Refrigeration System Operating Under Fouled Conditions,” 2021. | 10.1007/978-981-15-8304-9_16 | Naveen Solanki | 2021 | December | SCOPUS |
9 | Vipin Kumar Sharma, Sri Kant Rana, Roop Lal and Ramakant Rana, "Wear and Residual Stress Analysis of Waste Sea Shell and B4C Particles Reinforced Green Hybrid Aluminium Metal Composite", Journal of Engg. Research ICARI Special Issue, 2021, pp. 215-224, DOI: https://doi.org/10.36909/jer.ICARI.15317 | https://doi.org/10.36909/jer.ICARI.15317 | Ramakant Rana | 2021 | October | SCIE |
10 | Ramaknt Rana, Performance assessment of triangular Obstacles mounted Solar Air Heater Using Taguchi Method https://doi.org/10.36909/jer.ICARI.15321 | https://doi.org/10.36909/jer.ICARI.153211 | Ramakant Rana | 2021 | October | SCIE |
11 | R. Rana, L. Krishnia, R.S. Walia, Q. Murtaza, CVD Diamond Coated Tungsten Carbide (WC) Tool Inserts, J. Eng. Res. (2021). https://doi.org/10.36909/jer.ICARI.15319. | https://doi.org/10.36909/jer.ICARI.15319. | Ramakant Rana | 2021 | October | SCIE |
12 | R. Rana, L. Krishnia, Q. Murtaza, R.S. Walia, Optimizing the Machining performance of CNC tools inserts coated with Diamond like Carbon Coatings under the dry cutting environment, J. Eng. Res. (2021). https://doi.org/10.36909/jer.ICARI.15327. | https://doi.org/10.36909/jer.ICARI.15327 | Ramakant Rana | 2021 | October | SCIE |
13 | Ramakant Rana, "Wear and Residual Stress Analysis of Waste Sea Shell and B4C Particles Reinforced Green Hybrid Aluminium Metal Composite", Journal of Engg. Research ICARI Special Issue, 2021, pp. 215-224, DOI: https://doi.org/10.36909/jer.ICARI.15317 | https://doi.org/10.36909/jer.ICARI.15317 | Ramakant Rana | 2021 | October | SCIE |
14 | R. Rana, W. R.S., and Q. Murtaza, “Characterizing and Analyzing the Tribological Behaviour of Diamond Coated Tungsten Carbide (WC),” J. Eng. Res., Mar. 2022, doi: 10.36909/jer.ICAPIE.15107. | doi:10.36909/jer.ICAPIE.15107. | Ramakant Rana | 2022 | March | Scopus |
15 | Sachine Gupta, Performance assessment of triangular Obstacles mounted Solar Air Heater Using Taguchi Method https://doi.org/10.36909/jer.ICARI.15321 | https://doi.org/10.36909/jer.ICARI.15321 | Sachin Gupta | 2021 | October | SCIE |
16 | Satish kumar, Pankaj Chandna & Gian Bhushan (2021). Empirical modelling (A Green’s Function) for the prediction of work piece temperature during end milling of Inconel625. Journal of Thermal Engineering, Vol. 7, No. 8, Issue 14, pp. xx-xx, December 2021,Yildiz Technical University Press, Istanbul, Turkey | DOI: 10.18186/thermal.1051292 | Satish Kumar | 2021 | December | ESCI |
17 | Satish Kumar., Chandna, P. & Bhushan, G. Minimization of work piece temperature under the constraints of SR and MRR during 2.5 D milling process of Inconel 625 using GEMG-fuzzy and GA. Multiscale and Multidiscip. Model. Exp. and Des. (2022). https://doi.org/10.1007/s41939-021-00110-9 | https://doi.org/10.1007/s41939-021-00110-9 | Satish Kumar | 2022 | January | SCIE |
18 | Hitesh, R. Wattal and Surabhi Lata, Development and characterization of coal fly ash through low-energy ball milling, Volume 47, Part 11, 2021, Pages 2970-2975, https://doi.org/10.1016/j.matpr.2021.05.204 | https://doi.org/10.1016/j.matpr.2021.05.204 | Surabhi Lata | 2021 | October | SCOPUS |
19 | Siddharth, Dipender, Surabhi LataDesign development and analysis of cylindrical spring with variable pitch for two wheelers, Volume 47, Part 11, 2021, Pages 3105-3111, https://doi.org/10.1016/j.matpr.2021.06.130 | https://doi.org/10.1016/j.matpr.2021.06.130 | Surabhi Lata | 2021 | October | SCOPUS |
20 | Surabhi Lata and Siddharth, Sustainable and eco-friendly approach for controlling industrial wastewater quality imparting succour in water-energy nexus system, Volume 3, 15 December 2021, 100020, https://doi.org/10.1016/j.nexus.2021.100020 | https://doi.org/10.1016/j.nexus.2021.100020 | Surabhi Lata | 2021 | December | |
21 | Vipin Kumar Sharma, Modeling and analysis of a novel rotational magnetorheological abrasive flow finishing process, International Journal of Lightweight Materials and Manufacture, Volume 4, Issue 3, September 2021, Pages 290-301, DOI: https://doi.org/10.1016/j.ijlmm.2021.02.001 | https://doi.org/10.1016/j.ijlmm.2021.02.001 | Vipin Kumar Sharma | 2021 | September | SCOPUS |
Publications Along with DOIs and Citations 2020-2021 | ||||||
S. No | Citation | DOI/Link | Faculty | Year | Month | Indexing |
1 | Alok Kumar, Garg, R., and Garg, D. “Development of a Structural Model of Risk Factors involved in E-Supply Chain adoption in Indian Mechanical Industries”. International Journal of Supply & Operations Management, 7 (3), 242-260. | 10.22034/IJSOM.2020.3.3 | Alok Kumar | 2020 | September | SCOPUS |
2 | Ashwni, A. F. Sherwani, and D. Tiwari, “Thermodynamic analysis of simple and modified organic Rankine cycle and vapor compression refrigeration (ORC–VCR) systems,” Environ. Prog. Sustain. Energy, Dec. 2020, doi: 10.1002/ep.13577. | https://doi.org/10.1002/ep.13577 | Ashwni | 2020 | December | SCI/SCIE |
3 | A. Goyal, A. F. Sherwani, and D. Tiwari, “Exergy, economic and environmental analysis of organic Rankine cycle based vapor compression refrigeration system,” Int. J. Refrig., Feb. 2021, doi: 10.1016/j.ijrefrig.2021.02.005. | doi: 10.1016/j.ijrefrig.2021.02.005. | Ashwni | 2021 | Febuary | SCI/SCIE |
4 | A. Goyal, A. F. Sherwani, and D. Tiwari, “Optimization of cyclic parameters for ORC system using response surface methodology (RSM),” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 43, no. 8, Apr. 2021, doi: 10.1080/15567036.2019.1633443. | doi: 10.1080/15567036.2019.1633443. | Ashwni | 2021 | April | SCI/SCIE |
5 | A. Goyal, A. F. Sherwani, and D. Tiwari, Sensitivity Analysis and multi objective optimization of organic rankine cycle integrated with vapour compression refrigeration,” Energy Source Part, 2021, doi: 10.1016/j.ijrefrig.2021.02.005. | doi: 10.1016/j.ijrefrig.2021.02.005. | Ashwni | 2021 | April | SCI/SCIE |
6 | Garima Sharma and Kumar, P., 2021. An Analysis of Causal Relationships Among the Factors Affecting the Performance of a Service Organization. SAGE Open, 11(1), p.2158244021999394. | https://doi.org/10.1177/2158244021999394 | Garima Sharma | 2021 | March | SSCI |
7 | Madhukar Chhimwal, Agrawal, S. and Kumar, G., "Challenges in the implementation of circular economy in manufacturing industry", Journal of Modelling in Management, 2021 https://doi.org/10.1108/JM2-07-2020-0194 | https://doi.org/10.1108/JM2-07-2020-0194 | Madhukar Chhimwal | 2021 | Febuary | ESCI |
8 | Madhukar Chhimwal, Agrawal, S. and Kumar, G., "Sustainable Supply Chain Risk Mitigation: A mixed method approach", International Journal of Intelligent Enterprise, 2021 | https://doi.org/10.1504/IJIE.2022.121744 | Madhukar Chhimwal | 2022 | Febuary | SCOPUS |
9 | Madhukar Chhimwal, Agrawal, S., & Kumar, G. (2021). Measuring circular supply chain risk: a Bayesian network methodology. Sustainability, 13(15), 8448. https://doi.org/10.3390/su13158448 | https://doi.org/10.3390/su13158448 | Madhukar Chhimwal | 2021 | January | SCIE |
10 | Piu Jain, Suresh Garg & Gayatry Kansal (2021) A TISM approach for the analysis of enablers in implementing mass customization in Indian manufacturing units, Production Planning & Control, DOI: 10.1080/09537287.2021.1900616 | DOI: 10.1080/09537287.2021.1900616 | Piu Jain | 2021 | March | SCI/SCIE |
11 | R. Rana, R.S. Walia, Q. Murtaza, Characterization and Parametric Optimization of Performance Parameters of DLC-Coated Tungsten Carbide (WC) Tool Using TOPSIS, Coatings. 11 (2021) 760. https://doi.org/10.3390/coatings11070760. | https://doi.org/10.3390/coatings11070760 | Ramakant Rana | 2021 | June | SCI |
12 | Ramakant Rana Q. M. R. S. W. Ramakant Rana, “Optimization using genetic algorithm of tribological behaviour of WC tool material,” Indian J. Eng. Mater. Sci., vol. 27, pp. 889–896, 2020. | http://nopr.niscair.res.in/handle/123456789/55679 | Ramakant Rana | 2020 | August | SCI/SCIE |
13 | Ramakant Rana, Qasim Murtaza, R.S. Walia, Studying and Analysing the Properties of the CVD and PVD Coated Tools used in Conventional Lathe Machine Tools and CNC Machine Tools for Turning Processes, IJAPIE-2021-01-156, Vol 6 (1), 53-83 | https://doi.org/10.35121/ijapie202101156 | Ramakant Rana | 2021 | January | |
14 | Ramakant Rana, Jayesh Nagpal, Roop Lal, Ranganath M. Singari, Effects and applications of Surface Textures on CNC Inserts: a review, IJAPIE-2021-01-152, Vol 6 (1), 10-23 | https://doi.org/10.35121/ijapie202101152 | Ramakant Rana | 2021 | January | |
15 | Gupta, Arun Kumar, Satish Kumar, Pankaj Chandna, and Gian Bhushan. "Optimization of process parameters during pressure die casting of A380: a silicon-based aluminium alloy using GA & fuzzy methodology." Silicon 13, no. 8 (2021): 2429-2443. | https://doi.org/10.1007/s12633-020-00594-z | Satish Kumar | 2021 | July | SCIE |
16 | Satish Kumar, Arun Kumar Gupta, Pankaj Chandna, Gian Bhushan, Anish Kumar. (2021) A novel approach of GEF and GA for the optimization of multi-objective wire EDM process during the machining of DC53 super alloy. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 2, pages 1-13 095440892199291. | https://doi.org/10.1177/0954408921992918 | Satish Kumar Verma | 2021 | Febuary | SCI/SCIE |
17 | Sameer kumar Satish Kumar, Arun Gupta, Modeling and Estimation of cutting forces during milling using FEM, International Journal of Advance science and technology, 29 (8), 2020 | http://sersc.org/journals/index.php/IJAST/article/view/20731 | Satish Kumar Verma | 2020 | August | SCOPUS |
18 | Sidharth and N. Kumar, “Performance and emission studies of ternary fuel blends of diesel, biodiesel and octanol,” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 42, no. 18, Sep. 2020, doi: 10.1080/15567036.2019.1607940. | doi: 10.1080/15567036.2019.1607940. | Sidharth | 2020 | September | SCI/SCIE |
19 | Parvesh Kumar, Ramprasad Mangishetti, Sidharth, “Process Optimization of Biodiesel Production from Jatropha Oil Using Response Surface Methodology and it’s Characterization”, Solid State technology, Vol. 63, No.6, 2020 | http://solidstatetechnology.us/index.php/JSST/article/view/9104 | Sidharth | 2020 | October | |
20 | S. Khurana, A. Haleem, S. Luthra, and B. Mannan, “Evaluating critical factors to implement sustainable oriented innovation practices: An analysis of micro, small, and medium manufacturing enterprises,” J. Clean. Prod., vol. 285, Feb. 2021, doi: 10.1016/j.jclepro.2020.125377. | doi: 10.1016/j.jclepro.2020.125377. | Sonal Khurana | 2021 | Febuary | SCI/SCIE |
21 | S. Khurana, A. Haleem, S. Luthra, D. Huisingh, and B. Mannan, “Now is the time to press the reset button: Helping India’s companies to become more resilient and effective in overcoming the impacts of COVID-19, climate changes and other crises,” J. Clean. Prod., vol. 280, Jan. 2021, doi: 10.1016/j.jclepro.2020.124466. | doi: 10.1016/j.jclepro.2020.124466. | Sonal Khurana | 2021 | January | SCI/SCIE |
22 | Sumit Joshi, Utilisation of fly ash as a potential reinforcement material for better mechanical properties of Aluminum, International journal of advanced production and industrial engineering, Vol 5 (3), pp. 23-27 | http://ijapie.org/Impdocs/Vol5/IJAPIE-2020-07-344 | Sumit Joshi | 2020 | December | Crossref |
23 | S. Joshi, N. Yuvaraj, R. C. Singh, and R. Chaudhary, “Microstructural and Wear Investigations of the Mg/B4C Surface Composite Prepared Through Friction Stir Processing,” Trans. Indian Inst. Met., vol. 73, no. 12, Dec. 2020, doi: 10.1007/s12666-020-02102-8. | doi: 10.1007/s12666-020-02102-8. | Sumit Joshi | 2020 | December | SCI/SCIE |
24 | S. Joshi, R. C. Singh, and R. Chaudhary, “Effect of Friction of Friction stir Processing (FSP) on the wear behavior of cast AS21A magnesium alloy,” Surf. Rev. Lett., vol. 28, no. 01, Jan. 2021, doi: 10.1142/S0218625X20500377. | doi:10.1016/j.jclepro.2020.125377 | Sumit Joshi | 2021 | January | SCI/SCIE |
25 | Anmol Gupta, Surbhi Lata, Ramakant Rana, A statistical approach for overcut aand burr minimization during drilling of stir casted MgO reinforced Al composite, Advances in Manufacturing and Industrial Engineering, 2021 | doi.org/10.1007/978981-15-8542-5_23 | Surabhi Lata | 2021 | January | SCOPUS |
26 | V. Jain, R. Rawat, G. Sachdeva, and V. Kumar, “Multi-Objective Optimization of Cascade Refrigeration System Using the Concept of Modified and Advanced Exergy, Risk Level and Thermal Inventory,” Int. J. Air-Conditioning Refrig., vol. 28, no. 04, Dec. 2020, doi: 10.1142/S2010132520500364. | 10.1142/S2010132520500364 | Vaibhav Jain | 2020 | Dec | ESCI |
27 | V. Jain, A. Singhal, G. Sachdeva, and S. S. Kachhwaha, “Advanced exergy analysis and risk estimation of novel NH3-H2O and H2O-LiBr integrated vapor absorption refrigeration system,” Energy Convers. Manag., vol. 224, Nov. 2020, doi: 10.1016/j.enconman.2020.113348. | 10.1016/j.enconman.2020.113348 | Vaibhav Jain | 2020 | Nov | SCI/SCIE |
28 | V. Jain and D. Colorado, “Thermoeconomic and feasibility analysis of novel transcritical vapor compression-absorption integrated refrigeration system,” Energy Convers. Manag., vol. 224, Nov. 2020, doi: 10.1016/j.enconman.2020.113344. | doi: 10.1016/j.enconman.2020.113344. | Vaibhav Jain | 2020 | Nov | SCI/SCIE |
29 | Vikas Kumar, Gulshan Sachdeva, Sandeep Tiwari, Parinam Anuradha and Vaibhav Jain (2021), ‘An Experimental Investigation on Vapor Compression Refrigeration System Cascaded with Ejector Refrigeration System’, International Journal of Air-Conditioning and Refrigeration, Vol. No. 29 pp. 03, 2150028. DOI: https://doi.org/10.1142/S2010132521500280 | https://doi.org/10.1142/S2010132521500280 | Vaibhav Jain | 2021 | March | ESCI |
30 | V. K. Sharma, R. C. Singh, and R. Chaudhary, “Improvement in the performance of journal bearings by using lead-free bearing material and surface texturing,” Int. J. Surf. Sci. Eng., vol. 14, no. 3, 2020, doi: 10.1504/IJSURFSE.2020.110542. | doi: 10.1504/IJSURFSE.2020.110542. | Vipin Kumar Sharma | 2020 | Dec | SCI/SCIE |
31 | Vipin Kumar Sharma, R C Singh, Rajiv Chaudhary, Effect of fly ash and graphite addition on the tribological behavior of aluminium composites, Surf. Topogr.: Metrol. Prop. 9 2021 025027 | https://doi.org/10.1088/2051-672X/abfea1 | Vipin Kumar Sharma | 2021 | March | SCI/SCIE |
Publications Along with DOIs and Citations 2019-2020 | ||||||
S. No | Citation | DOI/Link | Faculty | Year | Month | Indexing |
1 | Alok Kumar, Garg, R., and Garg, D. “Critical Success Factors of Implementing E-Supply chain in Indian Mechanical Sector”. International Journal of Advanced Science & Technology, 29 (7), 11603-11628 | http://sersc.org/journals/index.php/IJAST/article/view/27593 | Alok Kumar | 2020 | July | SCOPUS |
2 | Alka , Atul Kumar Kaushik , Anil Kumar Dahiya 'Role of Stress on Mental Health of Women' International Journal for Research in Applied Science & Engineering Technology (IJRASET), ISSN: 2321-9653; Volume 7 Issue X, Oct 2019 | http://doi.org/10.22214/ijraset.2019.10135 | Anil Kumar Dahiya | 2019 | October | |
3 | D. Tiwari, A. F. Sherwani, M. Muqeem, and Ashwni Goyal, “Parametric optimization of organic Rankine cycle using TOPSIS integrated with entropy weight method,” Energy Sources, Part A Recover. Util. Environ. Eff., Aug. 2019, doi: 10.1080/15567036.2019.1649755. | doi:10.1080/15567036.2019.1649755. | Ashwni | 2019 | August | SCI/SCIE |
4 | Atul Kumar Kaushik , Anil Kumar Dahiya 'Role of Stress on Mental Health of Women' International Journal for Research in Applied Science & Engineering Technology (IJRASET), ISSN: 2321-9653; Volume 7 Issue X, Oct 2019 | http://doi.org/10.22214/ijraset.2019.10135 | Atul Kumar Kaushik | 2019 | October | |
5 | N. Dayal, V. Bhardwaj, M. Singh, and Rakesh Saini, “CVT Cooling of a BAJA All-Terrain Vehicle,” Aug. 2020, doi: 10.4271/2020-28-0020. | doi:10.4271/2020-28-0020. | Rakesh Chandra Saini | 2019 | August | SCOPUS |
6 | Mishank Sharma, Saksham Jindal, Sricharan Somayajula, Sagar Singh, Rakesh Chander Saini, Ramakant Rana, Designing and Analyzing the Suspension System of the Formula SAE, IJAPIE-2020-04-250, Vol 5 (2), 79-89 | https://doi.org/10.35121/ijapie202004250 | Rakesh Chandra Saini | 2020 | April | |
7 |
ShubhamUpadhyaya, Divyam Raj, Sourav Kumar Nanda, Kaushal Gupta, Tushar Gautam, Rakesh Chander Saini, Ramakant Rana, Design optimization and FEM Analysis of a Floating Caliper for BAJA ATV Vehicles, IJAPIE-2020-04-244, Vol 5 (2), 30-39 |
https://doi.org/10.35121/ijapie202004244 | Rakesh Chandra Saini | 2020 | April | |
8 |
Mishank Sharma, Saksham Jindal, Vishrut Munjal, Saurabh Dhyani, Tushar Gautam, Rakesh Chander Saini, Ramakant Rana,Design and Optimization of Suspension and Steering System of Efficycle – Human Powered Hybrid Tricycle, IJAPIE-2020-01-148, Vol 5 (1), 64-79 |
https://doi.org/10.35121/ijapie202001148 | Rakesh Chandra Saini | 2020 | January | |
9 | Shubham Upadhyaya, Divyam Raj, Kaushal Gupta, Rakesh Chander Saini, Ramakant Rana, Roop Lal, Designing and Analyzing the Brake Master Cylinder for an ATV vehicle, IJAPIE-2020-01-143, Vol 5 (1), 25-32 | https://doi.org/10.35121/ijapie202001143 | Rakesh Chandra Saini | 2020 | January | |
10 | Ramakant Rana, Q. Murtaza, and R. S. Walia, “GA based optimization of tri-bological behaviour of diamond coated tungsten carbide,” World J. Eng., vol. 17, no. 3, May 2020, doi: 10.1108/WJE-08-2019-0220. | doi: 10.1108/WJE-08-2019-0220. | Ramakant Rana | 2020 | May | ESCI |
11 |
Mishank Sharma, Saksham Jindal, Vishrut Munjal, Saurabh Dhyani, Tushar Gautam, Rakesh Chander Saini, Ramakant Rana, Design and Optimization of Suspension and Steering System of Efficycle – Human Powered Hybrid Tricycle, IJAPIE-2020-01-148, Vol 5 (1), 64-79 |
https://doi.org/10.35121/ijapie202001148 | Ramakant Rana | 2020 | January | |
13 | Shubham Upadhyaya, Divyam Raj, Kaushal Gupta, Rakesh Chander Saini, Ramakant Rana, Roop Lal, Designing and Analyzing the Brake Master Cylinder for an ATV vehicle, IJAPIE-2020-01-143, Vol 5 (1), 25-32 | https://doi.org/10.35121/ijapie202001143 | Ramakant Rana | 2020 | January | |
14 | Mishank Sharma, Saksham Jindal, Sricharan Somayajula, Sagar Singh, Rakesh Chander Saini, Ramakant Rana, Designing and Analyzing the Suspension System of the Formula SAE, IJAPIE-2020-04-250, Vol 5 (2), 79-89 | https://doi.org/10.35121/ijapie202004250 | Ramakant Rana | 2020 | April | |
15 |
ShubhamUpadhyaya, Divyam Raj, Sourav Kumar Nanda, Kaushal Gupta, Tushar Gautam, Rakesh Chander Saini, Ramakant Rana, Design optimization and FEM Analysis of a Floating Caliper for BAJA ATV Vehicles, IJAPIE-2020-04-244, Vol 5 (2), 30-39 |
https://doi.org/10.35121/ijapie202004244 | Ramakant Rana | 2020 | April | |
16 | S. Gupta, A. Roy, and A. Gupta, “Computer-aided engineering analysis for the performance augmentation of a fin-tube heat exchanger using vortex generator,” Concurr. Eng., vol. 28, no. 1, Mar. 2020, doi: 10.1177/1063293X19891770. | doi: 10.1177/1063293X19891770. | Sachin Gupta | 2020 | March | SCI/SCIE |
17 | A. Gupta, A. Roy, S. Gupta, and M. Gupta, “Numerical investigation towards implementation of punched winglet as vortex generator for performance improvement of a fin-and-tube heat exchanger,” Int. J. Heat Mass Transf., vol. 149, Mar. 2020, doi: 10.1016/j.ijheatmasstransfer.2019.119171. | 10.1016/j.ijheatmasstransfer.2019.119171. | Sachin Gupta | 2020 | March | SCI/SCIE |
18 | Gupta, Sachin, Aditya Roy, Arvind Gupta, and Munish Gupta. Numerical Simulations of Performance of Plate Fin Tube Heat Exchanger Using Rectangular Winglet Type Vortex Generator with Punched Holes. No. 2019-01-0145. 2019. | 10.4271/2019-01-0145 | Sachin Gupta | 2019 | September | SCOPUS |
19 | Gupta, S., 2020. Performance Improvement of a Fin-Tube Heat Exchanger Using Rectangular Winglet as Vortex Generator. International Journal of Energy, Environment and Economics, 25(4), pp.317-337. | https://scholar.google.co.in/citations | Sachin Gupta | 2020 | January | SCOPUS |
20 | Satish Kumar, Pankaj Chandna & Gian Bhushan, Prediction and optimization of work-piece temperature during 2.5-D milling of Inconel 625 using regression and Genetic Algorithm, Cogent Engineering, 7:1, 2020 DOI: 10.1080/23311916.2020.1731199 | DOI: 10.1080/23311916.2020.1731199 | Satish Kumar Verma | 2020 | Febuary | ESCI |
21 | Satish, Arun, pankaj, State of Art Optimization Techniques for Machining Parameters Optimization during Milling, Internation Journal of Engineering and Advanced Technology, 8 (6), 2019 | 10.35940/ijeat.F9562.088619 | Satish Kumar Verma | 2019 | August | |
22 | S. Khurana, B. Mannan, and A. Haleem, “Analysis of the critical factors for integration of sustainability with lean practices for Indian manufacturing enterprises,” Int. J. Forensic Eng. Manag., vol. 1, no. 1, 2020, doi: 10.1504/IJFEM.2020.109181. | doi: 10.1504/IJFEM.2020.109181 | Sonal Khurana | 2020 | January | ESCI |
23 | S. Khurana, A. Haleem, and B. Mannan, “Determinants for integration of sustainability with innovation for Indian manufacturing enterprises: Empirical evidence in MSMEs,” J. Clean. Prod., vol. 229, Aug. 2019, doi: 10.1016/j.jclepro.2019.04.022. | doi:10.1016/j.jclepro.2019.04.022. | Sonal Khurana | 2019 | August | SCI/SCIE |
24 | Surabhi Lata , Hitesh, A design insight for substitution of metal shims with reverse engineered element in tool post for alignment of tool work center, European Journal of Engineering Science and Technology, 114-129, (2020). | dpublication.com/journal/EJEST/article/view/248 | Surabhi Lata | 2020 | January | Google Scholar |
25 | Vaibhav Jain, N. Sharma, G. Sachdeva, and S. Kachhwaha, “Performance analysis and multi-objective optimization of cooling tower assisted vapor compression-absorption cascaded and hybrid refrigeration systems,” Int. J. Green Energy, vol. 16, no. 13, Oct. 2019, doi: 10.1080/15435075.2019.1653874. | doi:10.1080/15435075.2019.1653874. | Vaibhav Jain | 2019 | October | SCI/SCIE |
26 | S. Parashurama, M. S. Govindegowda, Vaibhav Jain and S. B. Anjappa. Hydrocarbons As Alternate Refrigerants In Domestic Refrigerators - An Overview "Indian Journal of Environmental protectection" (2019): 1119-1124 | https://scholar.google.com/citation | Vaibhav Jain, | 2019 | Scopus | |
27 | Vinayak Goel and Vipin Kumar Sharma, A Brief Review on Renewable Sources for Biofuel, Journal of Biofuels Vol. 10, Issue 2, July-December, 2019 pp. 51-54 | 10.5958/0976-4763.2019.00013.8 | Vipin Kumar Sharma | 2019 | December | - |
28 | Akshat Jain, V. K. Sharma Utilisation of fly ash as a potential reinforcement material for better mechanical properties of Aluminum, International journal of advanced production and industrial engineering, Vol 5 (3), pp. 23-27 | http://ijapie.org/Impdocs/Vol5/IJAPIE-2020-07-344 | Vipin Kumar Sharma | 2020 | July | CrossRef |
29 | V. K. Sharma, S. Chaudhary, R. C. Singh, Sonia, Vikas, and V. Goel, “Reusing marble dust as reinforcement material for better mechanical performance: studies on compositing aluminum matrix,” Mater. Res. Express, vol. 6, no. 12, Jan. 2020, doi: 10.1088/2053-1591/ab6702. | doi: 10.1088/2053-1591/ab6702. | Vipin Kumar Sharma | 2020 | Jan | SCI/SCIE |
30 | Vipin Kumar Sharma, R. C. Singh, and R. Chaudhary, “An experimental study of tribological behaviours of aluminium- and copper-based metal matrix composites for bearing applications,” Int. J. Mater. Eng. Innov., vol. 10, no. 3, 2019, doi: 10.1504/IJMATEI.2019.101964. | doi:10.1504/IJMATEI.2019.101964. | Vipin Kumar Sharma | 2019 | October | SCOPUS |
31 | Experimental Investigation of Machining Characteristics of Al 6063 Aluminium Alloy Using Response Surface Methodology, SAE Technical Paper, 2021, pp. | https://doi.org/10.4271/2021-01-0283 | Vipin Kumar Sharma | 2020 | April | SCOPUS |
32 | Vipin Kumar Sharma R C Singh Prem Kumar Agarwal, “Modelling for the pressure distribution in fluid film of Hydrodynamic Journal Bearing using SAE 20W40 lubricant,” Int. J. Manag. Technol. Eng., vol. 9, no. 5, pp. 3472–3477, 2019. | DOI:16.10089.IJMTE.2019.V9I5.19.28409 | Vipin Kumar Sharma | 2019 | September | UGC |
33 | Mayank Saxena, Md. Tarique, Md. Rafi, Mukul Anand, Sumit Joshi, Vipin Kumar Sharma, R. C. Singh and Rajiv Chaudhary (2020). Fabrication and Characterization of hybrid aluminium-fly ash-graphite composite. IOP: Materials Science and Engineering, 804, 012032 | https://doi.org/10.1088/1757-899X/804/1/012032 | Sumit Joshi | 2020 | June | |
Publications Along with DOIs and Citations 2018-2019 | ||||||
S. No | Citation | DOI/Link | Faculty | Year | Month | Indexing |
1 | Kumar, A., R. Garg, and D. Garg. "An empirical study to identify and develop constructive model of e-supply chain risks based on Indian mechanical manufacturing industries." Management Science Letters 9, no. 2 (2019): 217-228. | 10.5267/j.msl.2018.12.001 | Alok Kumar | 2019 | Febuary | - |
2 | Kumar, A., R. Garg, and D. Garg. "Development of decision support system for e-supplier selection in Indian mechanical manufacturing industry using distance based approximation." Decision Science Letters 8, no. 3 (2019): 295-308. | 10.5267/j.dsl.2018.12.001 | Alok Kumar | 2019 | March | SCOPUS |
3 | Goyal, Ashwni, and Naveen Kumar. Some Experimental Studies on the Use of Tyre Pyrolysis Oil (TPO) in an Agricultural Diesel Engine. No. 2019-01-0796. SAE Technical Paper, 2019. | 10.4271/2019-01-0796 | Ashwni | 2019 | April | SCOPUS |
4 | Narinder Kaushik, S. Singhal, Experimental Investigations on Microstructural and Mechanical Behavior of Friction Stir Welded Aluminum Matrix Composite, International Journal of Engineering (IJE), IJE TRANSACTIONS C A: Basics Vol. 32, No. 1, (2019) 162-170 | doi:10.5829/ije.2019.32.01a.21 | Narinder Kaushik | 2019 | January | - |
5 | Narinder Kaushik, Singhal, S., Rajesh, R., Gahlot, P., & Tripathi, B. N. (2018). Experimental investigations of friction stir welded AA6063 aluminum matrix composite. Journal of Mechanical Engineering and Sciences, 12(4), 4127–4140. https://doi.org/10.15282/jmes.12.4.2018.11.0357 | https://doi.org/10.15282/jmes.12.4.2018.11.0357 | Narinder Kaushik | 2018 | December | ESCI |
6 | Kaushik, Narinder, and Sandeep Singhal. "A case study of mechanical and metallurgical properties of friction stir welded AA6063 AMC." International Journal of Microstructure and Materials Properties 13, no. 3-4 (2018): 240-255. | 10.1504/IJMMP.2018.096148 | Narinder Kaushik | 2018 | November | SCOPUS |
7 | Singhal, Sandeep. "Dry-sliding wear analysis of SiC reinforced AA6063 as-cast aluminum metal matrix composites." Materials Today: Proceedings 5, no. 11 (2018): 24147-24156. | 10.1016/j.matpr.2018.10.209 | Narinder Kaushik | 2018 | December | SCOPUS |
8 | Naveen Kumar, Harveer Singh Pali, and Sidharth Bansal. "Some Studies on NOX Reduction From a Diesel Engine Using Stabilized Emulsion." In ASME International Mechanical Engineering Congress and Exposition, vol. 52071, p. V06AT08A063. American Society of Mechanical Engineers, 2018. https://doi.org/10.1115/IMECE2018-87374 | https://doi.org/10.1115/IMECE2018-87374 | Sidharth | 2019 | January | - |
9 | P. Kumar, P. Srinivasulu, and Sidharth, “Effect of Using Waste Plastic Oil on the Performance and Emissions Characteristics of Unmodified Constant Speed Direct Injection Diesel Engine,” J. Biofuels, vol. 10, no. 2, 2019, doi: 10.5958/0976-4763.2019.00011.4. | 10.5958/0976-4763.2019.00011.4. | Sidharth | 2019 | June | ICI |
10 | Sidharth and N. Kumar, “Comparison of properties of ternary fuel blends of diesel-octanol with biodiesel,” IOP C. Ser. Mater. Sci. Eng., vol. 691, Dec. 2019, doi: 10.1088/1757-899X/691/1/012050. | doi:10.1088/1757-899X/691/1/012050. | Sidharth | 2019 | Febuary | SCOPUS |
11 | Sumit Joshi, Ramesh Chandra Singh, Rajiv Chaudhary, Effect of rotational speed in friction stir processing on the microstructural and mechanical characteristics of cast AS21A magnesium alloy, Materials Research Express 6 (2019) 056554 | https://doi.org/10.1088/2053-1591/ab0633 | Sumit Joshi | 2019 | Febuary | SCIE |
12 | Sumit Joshi, Ramesh Chandra Singh, Rajiv Chaudhary, Microstructural and wear characterisation of as-cast AS21A magnesium alloy, Journal of Physics: Conference Series 1240 (2019) 012127. | https://doi.org/10.1088/1742-6596/1240/1/012127 | Sumit Joshi | 2019 | Febuary | Scopus |
13 | Regression based Experimental INvestigation of Process Parameters on Burr Formation and Overcut during Drilling Process, Journal of materials science and MEchanical Engineering, 6 (2), 109-113, (2019) | https://krishisanskriti.org/ijbab.php?Id=691 | Surabhi Lata | 2019 | Febuary | |
14 | Vaibhav Jain, Dhruva Gupta, Himank Gupta, Anirudh Sondhi, Amit Kumar. Comparative Performance Evaluation of Vapor Compression Refrigeration System for drop-in Replacement of R22 International Journal of Advance Research and Innovation" (2019): | https://ijari.org/assets/papers/6/3/IJARI-ME-18-09-135.pdf | Vaibhav Jain, | 2018 | September | - |
15 | Ashu Singhal, Sagar Hans, Vaibhav Jain Performance Evaluation of Wick Cooled Condenser in Vapor Compression Refrigeration System International Journal of Advance Research and Innovation" (2019): 150-152 | https://ijari.org/assets/papers/7/2/IJARI-ME-19-06-112.pdf | Vaibhav Jain, | 2019 | January | - |
16 | Vaibhav Jain, Gulshan Sachdeva, and S. S. Kachhwaha. "Comparative performance study and advanced exergy analysis of novel vapor compression-absorption integrated refrigeration system." Energy Conversion and Management 172 (2018): 81-97. | https://doi.org/10.1016/j.enconman.2018.06.116 | Vaibhav Jain, | 2018 | September | SCI |
17 | Vaibhav Jain, Gulshan Sachdeva, and S. S. Kachhwaha. Thermodynamic analysis of ejector-assisted vapour compression–absorption hybrid refrigeration system. "International Journal of Ambient Energy" (2019): 1-10 | https://doi.org/10.1080/01430750.2018.1562972 | Vaibhav Jain, | 2019 | January | Scopus |
18 | Sharma, Sandeep, Ishant Naru, and Sharma Vipin Kumar. "Utilization of Graphite Particles and Biodiesel on the Wear and Friction Behavior of Piston Rings Material." (2019): 41-50. | http://dx.doi.org/10.5958/0976-4763.2019.00007.2 | Vipin Kumar Sharma | 2019 | June | - |
19 | Vipin Kumar Sharma, Effect of Active Fluxes on The Weld Geometry, Bead Geometry And Hardness of Weld, MAIT Journal of Technology, 2018, December, 6-11 | https://mait.ac.in/index.php/quick-links/annual-fest | Vipin Kumar Sharma | 2018 | December | |
20 | Sidharth, Effect of Active Fluxes on The Weld Geometry, Bead Geometry And Hardness of Weld, MAIT Journal of Technology, 2018, December, 6-11 | https://mait.ac.in/index.php/quick-links/annual-fest | Sidharth | 2018 | December | |
21 | Sandeep Sharma, Ishita Rawat, Shivangi Gupta, Ishita Rawat, Vipin K. Sharma, Computational Fluid Dynamic Analysis of a Muffler of Two Wheeler Vehicle, MAIT Journal of Technology, 2018, December, 12-16 | https://mait.ac.in/index.php/quick-links/annual-fest | Vipin Kumar Sharma | 2018 | December | |
22 | Siddegowda, P., Mundur Sannappagowda, G., V. Jain, & Javare Gowda, S. (2019). Hydrocarbons as Alternate Refrigerants to Replace R134a in Domestic Refrigerators. Revue des Composites et des Matériaux Avancés, 29(2). | https://web.s.ebscohost.com/ | Vaibhav Jain, | 2019 | - | |