SYLLABUS SCHEME


SYLLABUS  SCHEME

GURU GOBIND SINGH INDRAPRASTHA UNIVERSITY

Sector - 16C Dwarka Delhi - 110078, India

BACHELOR OF TECHNOLOGY

(Mechanical& Automation Engineering)

 

BACHELOR OF TECHNOLOGY

(COMMON TO ALL BRANCHES)

 FIRST SEMESTER EXAMINATION

 

Code No.

Paper ID

Paper

L

T/P

Credits

Status

THEORY PAPERS

ETMA-101

 

Applied Mathematics-I

3

1

4

M

ETPH-103

 

Applied Physics-I

2

1

3

M

ETME-105

 

Manufacturing Processes

3

0

3

M

ETEE-107

 

Electrical Technology

3

0

3

M

ETHS-109

 

Human Values and Professional Ethics-I#

1

1

1

--

ETCS-111

 

Fundamentals of Computing

2

0

2

--

ETCH-113

 

Applied Chemistry

2

1

3

M

PRACTICAL/VIVA  VOCE

ETPH-151

 

Applied Physics Lab-I

------

2

1

 

ETEE-153

 

Electrical Technology Lab

------

2

1

M

ETME-155

 

Workshop Practice

------

3

2

M

ETME-157

 

Engineering Graphics Lab

------

3

2

 

ETCS-157

 

Fundamentals of Computing Lab

------

2

1

--

ETCH-161

 

Applied Chemistry Lab

------

2

1

--

 

 

NCC/NSS*#

------

------

------

--

TOTAL

16

18

27

 

M: Mandatory for award of degree

#NUES (Non University Examination System)

*#NCC/NSS can be completed in any one semester from Semester 1 – Semester 4. It will be evaluated internally by the respective institute. The credit for this will be given after fourth Semester for the students enrolled from the   session   2014-15   onwards.   The   camps/classes   will   be   held   either   during   Weekends/Holidays    or Winter/Summer Vacations.

BACHELOR OF TECHNOLOGY

(COMMON TO ALL BRANCHES)

SECOND SEMESTER EXAMINATION

Code No.

Paper ID

Paper

L

T/P

Credits

Status

THEORY PAPERS

ETMA-102

 

Applied Mathematics-II

3

1

4

M

ETPH-104

 

Applied Physics-II

2

1

3

 

ETEC-106

 

Electronic Devices

3

0

3

M

ETCS-108

 

Introduction to Programming

3

0

3

M

ETME-110

 

Engineering Mechanics

2

1

3

--

ETHS-112

 

Communication Skills

2

1

3

--

ETEN-114

 

Environmental Studies

2

1

3

--

PRACTICAL/VIVA  VOCE

ETPH-152

 

Applied Physics Lab-II

-------

2

1

 

ETCS-154

 

Programming Lab

-------

2

1

M

ETEC-156

 

Electronic Devices Lab

------

2

1

M

ETME-158

 

Engineering Mechanics Lab

-------

2

1

--

ETEN-160

 

Environmental Studies Lab

-------

2

1

--

 

 

NCC/NSS*#

-------

------

------

--

TOTAL

17

15

27

 

 

M: Mandatory for award of degree

#NUES (Non University Examination System)

*#NCC/NSS can be completed in any one semester from Semester 1 – Semester 4. It will be evaluated internally by the respective institute. The credit for this will be given after fourth Semester for the students enrolled from the session 2014-15  onwards.  The camps/classes  will be held either during Weekends/Holidays  or Winter/Summer Vacations.

 

BACHELOR OF TECHNOLOGY

 (MECHANICAL AND AUTOMATION ENGINEERING)

THIRD SEMESTER EXAMINATION

 

Code No.

Paper ID

Paper

L

T/P

Credits

Status

THEORY PAPERS

ETME-201

 

Fluid Mechanics

3

1

4

M

ETME-203

 

Thermal Science

3

1

4

M

ETAT-203

 

Strength of Material

3

1

4

M

ETME-205

 

Production Technology

3

1

4

M

ETME-207

 

Material Science and Metallurgy

3

0

3

 

ETME-209

 

Electrical Machines

3

0

3

 

PRACTICAL/VIVA VOCE

ETME-251

 

Fluid Mechanics Lab

0

2

1

 

ETAT-257

 

Strength of Material Lab

0

2

1

 

ETTE-259

 

Machine Drawing Lab

0

3

2

 

ETME-253

 

Electrical Machines Lab

0

2

1

 

 

 

NCC/NSS*

------

------

------

 

TOTAL

18

13

27

 

M: Mandatory for the award of degree.

*NCC/NSS can be completed in any one semester from Semester 1 – Semester 4. It will be evaluated internally by the respective institute. The credit for this will be given after fourth Semester for the students enrolled from the session 2014-15 onwards.

 

BACHELOR OF TECHNOLOGY

 

 (MECHANICAL AND AUTOMATION ENGINEERING)

FOURTH SEMESTER EXAMINATION

Code No.

Paper ID

Paper

L

T/P

Credits

Status

THEORY PAPERS

ETMA-202

 

Numerical Analysis and Statistical Techniques

3

1

4

 

ETAT-204

 

Fluid Systems

3

1

4

 

ETAT-202

 

Theory of Machines

3

1

4

M

ETME-206

 

Manufacturing Machines

3

1

4

M

ETME-208

 

Measurements and Instrumentation

3

0

3

 

ETEC-202

 

Switching Theory and  Logic Design

3

0

3

M

PRACTICAL/VIVA VOCE

ETMA-252

 

Numerical Analysis and Statistical Techniques Lab

-------

2

1

 

ETAT-254

 

Fluid Systems Lab

-------

2

1

 

ETAT-252

 

Theory of Machines Lab

-------

2

1

 

ETME-256

 

Manufacturing Machines Lab

-------

2

1

 

ETEC-252

 

Switching Theory and  Logic Design Lab

-------

2

1

 

ETSS-250

 

NCC/NSS*

-------

------

1

 

TOTAL

18

14

28

 

M: Mandatory for the award of degree.

*NCC/NSS can be completed in any one semester from Semester 1 – Semester 4. It will be evaluated internally by respective institute. The credit for this will be given after fourth Semester for the students enrolled from the session 2014-15 onwards.

NOTE: 4 weeks Industrial / In-house Workshop will be held after fourth semester. However, Viva-Voce will be conducted in the fifth semester.

 

 

BACHELOR OF TECHNOLOGY

 (MECHANICAL AND AUTOMATION ENGINEERING)

FIFTH SEMESTER EXAMINATION

Code No.

Paper ID

Paper

L

T/P

Credits

Status

THEORY PAPERS

ETME-301

 

Management of Manufacturing Systems

3

0

3

 

ETAT-303

 

Metal Cutting and Tool Design

3

1

4

M

ETAT-305

 

Heat Transfer and I.C. Engines

3

1

4

M

ETAT-307

 

Metrology

3

0

3

M

ETEL- 307

 

Control Systems

3

1

4

 

ETHS-301

 

Communication Skills for Professionals

2

0

1

 

PRACTICAL/VIVA VOCE

ETAT-351

 

Metal cutting and Tool Design Lab

0

2

1

 

ETAT-353

 

Heat Transfer and I.C. Engine lab

0

2

1

 

ETAT-355

 

Metrology lab

0

2

1

 

ETEL- 355

 

Control Systems Lab

0

2

1

 

ETHS-351

 

Communication Skills for Professionals Lab

0

2

1

 

ETAT-357

 

Industrial Training (conducted after fourth semester of 4-6 weeks)

0

0

1

 

 

 

Total

17

13

25

 

M: Mandatory for the award of degree.

*Viva-Voce for evaluation of Industrial Training / In-house Workshop will be conducted in this semester.

Note: Minimum of 2 weeks of In-house training related to ME will be held after 5th semester; however, viva-voce will be conducted in 6th Semester (ETAT 362).

 

 

BACHELOR OF TECHNOLOGY

 (MECHANICAL AND AUTOMATION ENGINEERING)

SIXTH SEMESTER EXAMINATION

Code No.

Paper ID

Paper

L

T/P

Credits

Status

THEORY PAPERS

ETAT-302

 

Machine Design

3

1

4

M

ETAT-304

 

Automobile Engineering

3

0

3

 

ETEC-310

 

Data Communications and Networks

3

1

4

 

ETAT- 306

 

Operations Research

3

1

4

 

ETME-308

 

Refrigeration and Air Conditioning

3

1

4

M

ETEE-310

 

Microprocessors and Microcontrollers

3

1

4

M

PRACTICAL/VIVA VOCE

ETAT-352

 

Machine Design Lab

0

2

1

 

ETAT-354

 

Automobile Engg Lab

0

2

1

 

ETEC- 358

 

Data Communications and Networks Lab

0

2

1

 

ETME-358

 

Refrigeration and Air Conditioning Lab

0

2

1

 

ETEE-358

 

Microprocessor and Microcontroller Lab

0

2

1

 

ETAT-362

 

In-house training (two weeks)

0

0

1

 

TOTAL

18

15

29

 

M: Mandatory for award of degree

Note: Minimum of 4-6 weeks of industrial training related to MAE will be held after 6th semester; however, viva-voce will be conducted in 7th Semester (ETAT-459).

Imp:- Elective Paper will be floated in 7th Semester, if one-third of the total students opt for the same. It is advised that the decision about the elective subject for 7h Semester is done before the 15th April every year before end of 6th semester.

 

 

BACHELOR OF TECHNOLOGY

 (MECHANICAL AND AUTOMATION ENGINEERING)

SEVENTH SEMESTER EXAMINATION

Code No.

Paper ID

Paper

L

T/P

Credits

THEORY PAPERS

ETAT-401

 

Computer Aided Design

3

1

4

ETME-403

 

Computer Integrated Manufacturing

3

1

4

ETAT-403

 

Mechatronics

3

0

3

Elective-I (choose any one)

ETME-407

 

Optimization Techniques

3

0

3

ETME-409

 

Preventive Maintenance and Condition Monitoring

3

0

3

ETME-411

 

Computational Fluid Dynamics

3

0

3

ETME-423

 

Finite Element Methods

3

0

3

ETEE-419

 

Renewable Energy Resources

3

0

3

ETCS-429

 

Artificial Intelligence

3

0

3

ETCS-425

 

Database Management System

3

0

3

Elective-II (Choose any one)

ETME-417

 

Advanced material science and metallurgy

3

0

3

ETEE-403

 

Advanced Control System

3

0

3

ETME-405

 

Power Plant Engineering

3

0

3

ETCS-411

 

Introduction to Data Science

3

0

3

ETME-421

 

Management Information System and ERP

3

0

3

ETAT-407

 

Advanced  Manufacturing Methods

3

0

3

ETHS-419

 

Sociology and Elements of Indian History for Engineers

3

0

3

PRACTICAL/VIVA VOCE

ETAT-451

 

Computer Aided Design Lab

0

2

1

ETME-453

 

Computer Integrated Manufacturing Lab

0

2

1

ETAT-453

 

Mechatronics Lab

0

2

1

ETAT-455

 

Lab Based on Elective- I or II

0

2

1

ETAT-457

 

Minor Project+

0

6

3

ETAT-459

 

Summer training#

0

0

1

TOTAL

15

16

25

Imp:- Elective Paper will be floated if one-third of the total students opt for the same. It is advised that the decision about the elective subject for 8th Semester is done before the 15th November every year before end of seventh semester. New Electives may be added as per requirement after getting it duly approved by BOS and AC respectively.

+ The student will submit a synopsis at the beginning of the semester for approval from the departmental committee in a specified format, thereafter he/she will have to present the progress of the work through seminars and progress reports.

#NUES (Non University Examination System)

 

 

BACHELOR OF TECHNOLOGY

 (MECHANICAL AND AUTOMATION ENGINEERING)

EIGHTH SEMESTER EXAMINATION

Code No.

Paper ID

Paper

L

T/P

Credits

ETMT-402

 

Robotics

3

1

4

ETME-402

 

Engineering System Modelling and Simulation

3

1

4

ETHS-402

 

Human Values and Professional Ethics-II

1

0

1

Elective-III (choose any one)

ETEC-432

 

Image Processing and Machine Vision

3

0

3

ETIT-410

 

Soft Computing

3

0

3

ETME-426

 

Total Quality Management

3

0

3

ETME-414

 

Applied Plasticity

3

0

3

ETME-430

 

Computer Aided Graphics and Product design

3

0

3

ETEC-434

 

Microprocessor System Based Process Design

3

0

3

Elective-IV(choose any one)

ETAT-432

 

Gas Turbines and Compressors

3

0

3

ETME-424

 

Cryogenic Engineering

3

0

3

ETME-412

 

Rapid Prototyping

3

0

3

ETMT-428

 

Flexible Manufacturing System

3

0

3

ETTE-424

 

Supply Chain management-planning

3

0

3

ETAT-442

 

Process Planning and Cost Estimation

3

0

3

PRACTICAL/VIVA VOCE

ETMT-452

 

Robotics Lab

0

2

1

ETME-452

 

Engineering System Modelling and Simulation Lab

0

2

1

ETAT-456

 

Lab based on Elective III or IV

0

2

1

ETAT-458

 

*Major project

0

12

8

TOTAL

13

20

26

*The student will submit a synopsis at the beginning of the semester for approval from the departmental committee in a specified format, thereafter he/she will have to present the progress of the work through seminars and progress reports. Seminar related to major project should be delivered one month after staring of Semester. The progress will be monitored through seminars and progress reports.

#Elective Paper will be floated if one-third of the total students opt for the same. It is advised that the decision about the elective subject is done before the 15th November every year before end of seventh semester. New Electives may be added as per requirement after getting it duly approved by BOS and AC respectively.

**Syllabus may be revised after 2 years.

NOTE:

1.        The total number of the credits (MAE) Programme = 214.

2.        Each student shall be required to appear for examinations in all courses. However, for the award of the degree a student shall be required to earn minimum of 200 credits including Mandatory papers (M).

FOR LATERAL ENTRY STUDENTS:

1.        The total number of the credits of the B.Tech. (MAE) Programme = 160.

2.        Each student shall be required to appear for examinations in all courses Third Semester onwards. However, for the award of the degree a student shall be required to earn the minimum of 150 credits, including mandatory papers (M).